*Note: These instructions are based on the Fellowes Jupiter 2 model. If you require assistance with another laminator model please ask for guidance from staff at the Library hub.
Both A4 and A3 laminate pouches can be picked up from the library and Student Life Building Hubs during full-service hours for no cost.
1. Place your work inside the laminate pouch.
2. Power on the laminator by turning it on at the wall socket and switch located at the rear right-hand side of the machine.
WARNING! DO NOT PLACE PAPER DIRECTLY INTO THE LAMINATOR
LAMINATOR POUCHES ARE AVAILABLE FROM THE HUB
To avoid jams only laminate paper or card. Avoid attaching buttons, coins or other objects. Laminating small cut out shapes reduces the rigidity and can also cause jams (alternatively you can print everything on 1 sheet and cut out the small shapes after it is laminated).
This laminator does not require a cardboard pouch to operate